VW changed that wiring path by making it larger and more direct over the years after yours. You saw for yourself why they deemed that necessary. Too much voltage drop with various things turned on. Adding a new #10 or #8 from the alternator to the starter motor post is similar to what they did. Mark
Michael A. Radtke wrote: > Hello, > > Thank you all for your replies. > > I had already verified all of the ground paths and determined the > voltage drop was in the positive wiring. With your help, I located the > junction that I couldn't find. My car has no corrosion on any if the > connections, but I still checked each current path across the junctions > for any voltage drop. None was found. I determined that all of the > loss in voltage was in the wires themselves. Since they are in great > condition, I concluded that this is the way VW designed it. >............. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.