Date:         Mon, 13 Dec 2010 15:41:59 -0500
Reply-To:     Edward Maglott <emaglott3@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Maglott <emaglott3@GMAIL.COM>
Subject:      Re: Blower motor anatomy
In-Reply-To:  <4d05a627.5145e50a.138c.ffffc879@mx.google.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Very good photos and description.  Thanks for doing that.  I recall
Karl Mullendore described a method to lube the motor while it's in
the van.  I guess this would just get the bearing on the rear non
impeller-end.  Is that the end that needs more attention because it
gets so dirty?  How beneficial do you think Karl's remote oiling
technique would be?

Edward

At 11:50 PM 12/12/2010, David Beierl wrote:
>http://picasaweb.google.com/dbeierl/VanagonAnatomyOfABOSCHHeaterBlowerMotor#
>
>Same link, different message title.
>
>Yours,
>David

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.