Date:         Tue, 14 Dec 2010 22:09:30 -0500
Reply-To:     John Meeks <vanagon@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Meeks <vanagon@GMAIL.COM>
Subject:      Re: Cables - front to rear
Comments: To: Jonathan Berg <jonbergga@gmail.com>
In-Reply-To:  <AANLkTi=SChVS7wxrX6kA2rHRrV4iz0UTz49NsRHtbrAJ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

On Tue, Dec 14, 2010 at 6:20 PM, Jonathan Berg <jonbergga@gmail.com> wrote:

> I used two lengths of trailer wiring. The 4 conductor flat cables,
> 16ga. Painted one side of one run red, and one side of the other run
> black. That way I could tell the wires apart at both ends. Snaked both
> runs in some moderately size heat shrink tubing, and then wound that
> conglomeration under the van from engine compartment to the dashboard.
> Running my oil pressure and temp sensors on 2 of the wires. Still
> pondering what to do with the other 6 wires - they'll be there if I
> ever think of something.
>
> JB
>
>
Jonathan,

Here's a thought:
*Ken Lewis's** *wonderful little O2 sensor *gizmo*:
http://neksiwel.20m.com/photo5.html *...*


John Meeks
'91 Vanagon MV
Northern Michigan

Vanagon Rescue Squad
www.vanagonauts.com