Just curious as to why you recommend marvel mystery oil rather than a good machine oil? Say like velocite no. 6 spindle bearing oil? Todd On 12/12/2010 8:35 PM, David Beierl wrote: > Quoting myself: >> Bosch blower motors that are squealing, running slow or even seized >> can almost always be saved by freeing-up and oiling. This one can't >> because the switch was left on in high position while it was seized, >> until a terrible smell emerged and the fuse blew. Since the motor's >> dead, good chance to show how one is put together and where to oil >> it. Note that to get to the oiling places (except the outside of the >> rear bearing) you have to remove the motor, which is not very >> difficult if you have a vise. I'll have more pictures later showing >> how this is done. On the Meyle aftermarket blowers the design >> requires that a puller of some sort be built that will extract the >> blower wheel from its shaft; so generally speaking the Meyle is not >> practically serviceable. > > http://picasaweb.google.com/dbeierl/VanagonAnatomyOfABOSCHHeaterBlowerMotor# > > > Yours, > David > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.