Hi all. I don't see any pics in Bentley of this so..... Is this hose routing stock? pics: http://tinyurl.com/2whtdj7 http://tinyurl.com/2wxp2qx Curious as protective pad is there. If stock, I wonder if my cheap aftermarket tank is too large at that spot. Would this hose position cause poor fitment of my gas tank (too low) at filler pipe hole? Seems it would but if anyone else has dealt with this.... Fill holes in old and new tank *seem* to be the same height-wise. They're hard to measure. A newb at the time of tank reseal, I recall cutting the hose back at expansion tank valve to remove it. In "pulling up" slack I might have re positioned hose between tank and frame. This is on a tank with large ID metal filler neck. Neil. -- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.