Date: Fri, 7 Jan 2011 01:12:36 -0700
Reply-To: Karl Wolz <wolzphoto@Q.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Karl Wolz <wolzphoto@Q.COM>
Subject: Re: Front, driver's side turn light...
In-Reply-To: <45831CEA85D34D1184623EF899C188BB@PHILIPBAIRD>
Content-Type: text/plain; charset="us-ascii"
As I posted yesterday, always mistrust the part you installed last. Check
the bulb.
Karl Wolz
|-----Original Message-----
|From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
|Phil
|Sent: Thursday, January 06, 2011 7:12 PM
|To: vanagon@GERRY.VANAGON.COM
|Subject: Re: Front, driver's side turn light...
|
|Checked the wiring and connectors. All look good.
|Thanks
|
|-----Original Message-----
|From: mark drillock [mailto:mdrillock@cox.net]
|Sent: Thursday, January 06, 2011 5:05 PM
|To: Phil
|Cc: vanagon@GERRY.VANAGON.COM
|Subject: Re: Front, driver's side turn light...
|
|Pull the rubber boot back and look at the wire connections. Very common for
|them to be ugly as heck. This is a chronic problem due to a design weakness
|in the front marker light assembly. Water gets in and the boot keeps it in
|rather than keeping it out. This corrodes the wires and spade connections.
|
|Mark
|
|
|
|Phil wrote:
|> Thanks for getting back to me, Ben. Checked contacts when I replaced
|> the bulb. By the way, the passenger side works fine. Hmmm..could it be
|> the flasher?
|>
|> -----Original Message-----
|> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
|> Behalf Of BenT Syncro
|> Sent: Thursday, January 06, 2011 4:15 PM
|> To: vanagon@GERRY.VANAGON.COM
|> Subject: Re: Front, driver's side turn light...
|>
|> Whoops, I didn't read the part that you changed the bulb. Time to
|> check the contacts in the bulb socket. Emery cloth usually does the
|> trick if it's just corroded.
|>
|>
|> BenT
|>
|>
|>
|> On Jan 6, 2011, at 4:12 PM, BenT Syncro<syncro@gmail.com> wrote:
|>
|>> Phil,
|>>
|>> I'll bet you have a burnt out bulb. IIRC, it's dual filament unit,
|>> meaning
|> both running and blinking elements in the same bulb.
|>>
|>>
|>> BenT
|>>
|>> ps: this assuming you do not have a Euro spec Wolfie.
|>>
|>> On Jan 6, 2011, at 3:40 PM, Phil<mypactor@PACBELL.NET> wrote:
|>>
|>>> With my '89 Wolfie, my left, front running light doesn't work. The
|>>> brighter, turn indicator light DOES work. I've changed out the
|>>> bulbs and checked all fuses. Still nada. Anyone have an idea?
|>>>
|>>>
|>>>
|>>> Thanks, Phil in Bakersfield
|>
|