Might try to remove the roll pin and reverse the "cup,lever,widget" on the shift shaft. Have tightened up a few this way successfully. They are dealer NLA. Try our usual vendors too. Or maybe tig the hole closed and re drill as one of my customers is doing. Daryl of AA Transaxle 425-788-4070 "On the cutting edge of Old technology" 86 Syncro Westy w/Turbo Zetec in the trunk
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Dennis Haynes Sent: Tuesday, January 04, 2011 6:27 PM To: vanagon@GERRY.VANAGON.COM Subject: Part needed-Selector lever I need a vanagon shifter part, called the selector lever, part # 251711973. Anybody have one? Will take complete rear shift rod if needed.
Thank you, Dennis |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.