While we are on the subject of machining rims, please take a moment to pmail me information on machine shops in your area who are willing to perform this sort of work. I will compile it into a master list and report back here. Hopefully, enough of a database can be created so that it will be easier in the future for our fellow listmembers to locate a competent machine shop and/or determine which ones to avoid.
Regards, BenT Sent from my Audi rims on my Vanagon On Jan 13, 2011, at 10:40 AM, David Beierl <dbeierl@ATTGLOBAL.NET> wrote: > At 01:02 PM 1/13/2011, JordanVw@AOL.COM wrote: >> im four hours from DC.. kinda bit of a drive to just go to a machine shop >> IMO.. > > Hey, it's pretty country around there, or at least not too far from > there, and should be a lot more pleasant than what I was just > describing. And he'll get to meet you. Sounds like a good deal to me. > > :) > d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.