Yes they can be and are that bad. The metal on the crimped section is so weak that instead of crimping the connector is smashed onto the wire. Then the wire splays out and is not tight in the crimp. With a good crimp you should be able to grab the connector with one hand, the wire in the other and rock the wire back and forth. There will be no wire movement inside the connector. This will never be the case with the cheap Chinese crimp connectors sold by Harbor Freight. David recommended NAPA - take his advice. Don't get me wrong, Harbor Freight sells some good stuff, just not these. For example, I own a tire mounting stand that I use to mount motorcycle tires whenever I need new ones and the stand works great. I also own a chop saw, a arbor press, a drill press and assorted other items from them and they all work great. But I looked at a end mill they were selling and the there was so much slop in the carriage that I turned a crank one direction then turned over a full turn the other direction before it started moving back the other way! The key is - can cheapening the product reduce quality and reliability to the point where I won't be happy with it? If the answer is "Yes" then don't buy it at Harbor Freight! Tom www.towercooler.com
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of Rob Sent: Monday, January 10, 2011 9:26 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Tools I'm not arguing... but we are talking about these metal pieces with plastic for insulation, you slip a wire in and crimp it. Can HF connectors be that bad? Rob becida@comcast.net on the road BBB currently in Sonoma county California
At 1/10/2011 06:41 PM,Tom Hargrave wrote: >My experience with Harbor Freight electrical connectors is they are junk. > >You are better off buying your terminals at your local parts store. > >Tom and At 1/10/2011 06:48 PM,David Beierl wrote: >Rob, do yourself a favor and at least go to NAPA instead. Crimp connectors are like electrical tape -- the best you can find is barely good enough. You won't like what >they cost, but you'll only have to buy them once. >Yours, >David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.