Date:         Thu, 13 Jan 2011 11:37:42 -0800
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: Stinkin' Audi Rims
In-Reply-To:  <4d2f473a.9c4de50a.193a.1908@mx.google.com>
Content-Type: text/plain; charset=us-ascii

While we are on the subject of machining rims, please take a moment to pmail me information on machine shops in your area who are willing to perform this sort of work. I will compile it into a master list and report back here. Hopefully, enough of a database can be created so that it will be easier in the future for our fellow listmembers to locate a competent machine shop and/or determine which ones to avoid.


Regards,

BenT

Sent from my Audi rims on my Vanagon

On Jan 13, 2011, at 10:40 AM, David Beierl <dbeierl@ATTGLOBAL.NET> wrote:

> At 01:02 PM 1/13/2011, JordanVw@AOL.COM wrote:
>> im four hours from DC.. kinda bit of a drive to just go to a machine shop

>> IMO..
> 
> Hey, it's pretty country around there, or at least not too far from
> there, and should be a lot more pleasant than what I was just
> describing.  And he'll get to meet you.  Sounds like a good deal to me.
> 
> :)
> d