Date: Mon, 17 Jan 2011 19:22:51 -0800
Reply-To: Alistair Bell <albell@SHAW.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Alistair Bell <albell@SHAW.CA>
Subject: Re: Sound deadening and door speakers
In-Reply-To: <AANLkTi=Pfej+xwkcE_7uKWC3yxHpmTxQQ14f0LsfjaUw@mail.gmail.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Years ago (2001) I used "super proguard" brand roofing material in my
'82 westy. It was not granulated and had a blue poly face and self
adhesive adhesive backing, and just under 1/8th inch thick. I put it
all over the interior walls and floor of the van, 3 layers. It went on
easy (summer) and held fast.... mostly.
The difference in road noise was noticeable.
But, and here is the proviso, be careful when you apply to the front
doors. My van had some wax on the interior surfaces of the doors and
the proguard did not adhere perfectly and started to droop in the heat
of summer and caught on the window.
Also, as i dismantle that van I can see where it really stuck and
where it didn't. The front doors, and above the driver/passenger were
drooping. Everywhere else was good.
I was happy overall with the result of using the stuff, no smell after
the first week, even in 40 C plus temps.
This time around with my '86 syncro I am going to try a different
approach, Will explain later.
alistair
On 15-Jan-11, at 7:19 PM, Jonathan Edwards wrote:
> Hey folks - I'm in the process of replacing my damaged 2 front
> interior door
> panels and got a couple questions.
>
> First off, while I've got the panels off and door frame exposed, I'd
> like to
> do some sound deadening. I've heard of people using "Ice and Water
> Shield"
> which is a urethane/rubber underlayment used in home roofing. It can
> be
> purchased at Home Depot, etc, and is considerably cheaper than
> products
> marketed as 'sound deadening' specific, and it appears to be pretty
> similar
> stuff. Have any of you used it for this purpose, or have any
> thoughts? And
> would I apply a stick-on sound deadening material like this between
> the door
> panel and the door, or is it possible/affective to insulate the
> inside of
> the door (on the back side of the exterior surface).
>
> The second part of my project involves new speakers. The replacement
> door
> panels I got have no speaker holes at all (I think they came out of
> an '80
> air cooled with no door speakers), so I've got the option to install
> speakers in the lower part of the panel, where there is a larger
> cutout in
> the door. I'm hoping I can fit 6.5" speakers down there. Has anyone
> here
> been successful doing this?
>
> Thanks!
>
> Jon
|