Date:         Sat, 15 Jan 2011 09:01:50 +0000
Reply-To:     brett rueff <rueffy@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         brett rueff <rueffy@HOTMAIL.COM>
Subject:      eccentric washers
Content-Type: text/plain; charset="iso-8859-1"

Any list vendors sell the different sized washers?  I see van cafe have one - im guessing its stock 4mm since they dont have the size specified.  I have about 2mm of space between the control arm and the washer I have to deal with....but only on side of the car.

Looking at the Bentley it appears filling the space really only applies to the syncro and not my 91 2wd.  From the archives though it seems a lot of people are going to the trouble of shimming correctly.

Brett
                                          

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.