good point Mark, you're right. and I should check out a internal pipe grabber tool. Scott ----- Original Message ----- From: "mark drillock" <mdrillock@COX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, January 26, 2011 3:53 PM Subject: Re: Oil leak...
> Not really. You just unscrew the original nut till it is a few threads > from the end and then add the second nut. Tighten the 2 nuts together > near the end. This way you have more room to use standard wrenches on > both nuts. > > Mark > > Scott Daniel - Turbovans wrote: > ..... If I needed another nut I would expect to >> be able to get one in a few days inexpensively from my VW dealer. >> you would also need a very thin wrench in that size, or skinny pliers. >> >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.