7mm thread, not a 6. Most replacement wheels will require removal of these two screws. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell Sent: Friday, January 21, 2011 6:29 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: VW Necessity... Thanks Scott. Its funny why a 11 mm was used on the drums eh? why not 10? alistair
On 21-Jan-11, at 3:13 PM, Scott Daniel - Turbovans wrote: > the only 11's I can think of on the whole van are the brake drum > retaining screws, as mentioned already ... and there two per rear > wheel of course. > That thread is barely used on vangons ..it's a 7 mm diameter bolt > thread, of a pretty fine pitch. > > and brake lines.. > 11mm on those ...12mm on the clutch hydraulics I think. > otherwise no 11's anywhere I believe. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.