In a message dated 1/25/2011 7:01:24 P.M. Eastern Standard Time, a.robinson.lists@GMAIL.COM writes: Remove 2 hoses going to cooler (They should come off as I just did the WP a while ago) and drain coolant
this job can be done without removing these hoses. Use a large ezout to remove the stand pipe , then lower cooler enough to remove o ring seal and replace. whole lot easier and quicker later mark d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.