New experience. Got in the van last night, turned on the headlights. Nothing! Dash lights OK, driving lights OK, brake lights OK. No head lights. No high beams, no low beams. BUT - if I hold the turn-signal/bright/dimm stalk in the 'back" position - i.e - towards the driver. ALL the headlights come on, but immediately go off when released. This is a new event to me. I checked the big connector at the right of the instrument cluster and it seems tight. Any one experienced this before? Have any ideas where to start looking for the trouble? Thanks, John -- John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.