The pistons have to go with the cylinders they were originally with. That is about all that is critical. You should be able to mix and match the rest. Ken Wilford John 3:16 www.vanagain.com On 2/5/2011 12:29 PM, Joe Luther wrote: > As noted, one of the 2.0 AC engines I am getting with my Vanagon has been > completely disassembled. I'm hoping that the current owner marked the > pushrods, lifters, cylinders etc during disassembly since it was obvious > from the dozen dual ports scattered around he's not new to this. On the off > chance he didn't, how much trouble am I in? I have access to some metrology > devices so I can measure as needed. > > TIA > > Joe > > Technical Manager > Alfons Haar Inc. > 150 Advanced Dr. > Springboro, Ohio 45066 > 937.560.2031 main > 937.560.2032 fax > 937.560.2037 direct > An ISO 9000:2008 certified organization > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.