Scott, is it really doable? I'm surprised, seemed like I needed all the space afforded with dash off. And how did you get at the 2 13mm nuts on the forward end of the 2 braces that support the dash and steering wheel? Did you modify a wrench to get in there? alistair
On 2-Feb-11, at 9:38 AM, Scott Daniel - Turbovans wrote: > The pedal cluster comes out without removing the whole dash. > It's tight ...but doable. > Worth it to me to leave all those many screws right where they are. > > I always put a very small dab of grease on the pointy end of the > clutch > master cylinder push rod where it pushes on the piston....can't > imagine that > bare metal-to-metal there would be right. Same for any brake master > cylinder > too. > > Scott |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.