cool Gregg, I hope it goes real nicely. It could/should. minor word of warning about those plastic t-stat housings..the bottom part .. they melt, warp, and break. Hopefully yours is fine and not an issue in any way. which type of coolant do you run ? Scott www.turbovans.com ----- Original Message ----- From: "Gregg Carlen" <gregg.carlen@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, February 11, 2011 1:24 PM Subject: Re: Engine running COLD
> Thanks Scott, et al, > > I've got an 87deg thermostat on the way from Bus Depot, so that will go in > soon. I think I've convinced myself that this is either a stuck-open > thermostat, or, more likely missing altogether. Soon as I have the new > thermostat in hand, I'll open the housing and put the new one in. > Hopefully > there's no suprises when I open it up. > > Thanks for all the advice! > Gregg > 90 Westy > On Fri, Feb 11, 2011 at 1:11 PM, Scott Daniel - Turbovans < > scottdaniel@turbovans.com> wrote: |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.