Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2011, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 9 Feb 2011 17:13:12 -0800
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: U-joint for Syncro
Comments: To: Frank Condelli <RAlanen@AOL.COM>
In-Reply-To:  <4AE4151B-9572-4726-B5AA-E9EE649C1984@aol.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes

The U joint I used came with different thickness c-clips, so one could choose the right one for the yoke's groove. And yes, shim stock should be used if needed to take up play, and shimming should be symmetrical. But that's pretty well standard practice I think.

BTW the stock VW joints removed did not seem at all self centering.

alistair

On 9-Feb-11, at 4:35 PM, Frank Condelli wrote:

> I have done this also just to add to the chorus. Just be > careful as some of those replacement U-joints have to be centred in > the yoke. I used ones from NAPA and they did not self centre. > There was a mm or so of space between the clip and the bearing so > the cross needs to be centred in the yoke so the space is equal on > both sides then that space has to be filled with a shim between the > clip and the bearing cap. > > > On 2011-02-10, at 6:28 AM, Automatic digest processor wrote: > >> U joint is replaceable, I and others have done it. I used Precision >> brand, part #813. > > > > Please note that I will be away from my business travelling > from December 06 until April 30, 2011. Parts orders will be > processed although not as quickly as usual. I will always be > available for contact by E-mail. If you phone your call will be > addressed by Greg T. Brown here and he will either call you back or > advise you to contact me directly by E-mail. Details of this > adventure are on our Travel Blog: http://frankcondelli.com/travels/ > > Cheers, > > Frank Condelli > Almonte, Ontario, Canada > '87 Westy & Lionel Trains (Collection for sale) > Frank Condelli & Associates - Vanagon/Vanagon Westfalia Service in > the Ottawa Valley Vanagon Stainless Steel Exhaust Systems > BusFusion a VW Camper camping event, Almonte, ON, June 09 ~ 12, 2011


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.