On Tue, Feb 15, 2011 at 5:13 PM, John Rodgers <inua@charter.net> wrote: > I restored a pump that was seized by pouring carb cleaner down it and > soaking for a few hours. Shook it out, them hooked the battery to it, > reversing polarity. Hit the button for just a few seconds. Then reversed > the polarity again, repeated. Sprayed cleaner and repeated. I DID NOT > allow the pump to run in that condition for any time much at all. Just a > hit to loosen things. Afterward. flushed first with more carb cleaner > then with some gas. Re-installed. Worked perfect and still does. Made > sure there was no debris in front. I like the idea of the small filter > in front, even though my '88 GL didn't at the time have one. Only the > fat filter. >
Thanks fine and dandy if one is careful. I would be concerned having sparks nearby when connecting and disconnecting the electrical contacts near flammable fumes. Not intending on hijack your thread but on a different note and somewhat... There's another fuel hose fire victim Westy posted on CL in my area. This one is defnitely a bad hose per owner. -- BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.