At 01:08 AM 2/28/2011, Tom Hargrave wrote: >The solder fatigue you took pictures of is common for electronics >that have been in a vehicle for a long time. Ayuh. And not by any means just automotive gear. So why aren't there more images out there? > usually the parts that fatigue are heavier power resistors, caps > or inductors. They seem to be more susceptible than smaller, lighter parts. To amplify on that somewhat: heavy parts, parts that stand away from the board, parts subject to thermal cycling and most particularly parts with pronounced thermal cycling that are mechanically connected to a stiff external structure (like the devices connected to the heat sink in our ECUs). But the curious thing I'm finding in the ECUs is bad joints in small light parts that sit right on the board, in low-power DIP leads, in the flattened-ribbon connections between boards. I find that surprising. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.