Date:         Wed, 23 Feb 2011 20:54:05 -0600
Reply-To:     Tom Hargrave <thargrav@HIWAAY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Hargrave <thargrav@HIWAAY.NET>
Subject:      Re: Sealant necessary for coolant hoses?
Comments: To: "M. Jade" <tinho2010@YAHOO.COM>
In-Reply-To:  <54446.36145.qm@web62305.mail.re1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

How old is the hose? It might be time to replace it & if it is then
tightening is just putting off the inevitable.



Tom



From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
M. Jade
Sent: Wednesday, February 23, 2011 7:41 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Sealant necessary for coolant hoses?



I may be finding coolant leak from where the coolant hose is attached to the
thermostat housing  on my 85.  It should be an easy fix by tightening the
clamp. But I am afraid that if I really clamp it down it may cause coolant
hose damage over time. I probably should take it apart and clean the metal
pipe first then re-attach the hose. My question is should I put some sealant
to aid in sealing the joint to keep it from leaking? What sealant should I
use? What comes to mind is if I use a correct sealant then I won't need to
tighten the hose clamp crazy tight to keep it from leaking. Am I right that
coolant hose can be damaged from over tightening the clamp?

MJ in sunny California




  _____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1435/3464 - Release Date: 02/23/11