Original design was to use the lug wrench. It is 19mm. And it's a big bolt, I think 14mm, so you can really go at it withoug worrying of braking it off. But make sure, you are turning it the correct way. It's easy to miss the direction when you are upside down to it. The wd40 won't help much if it's not going on the threads. Try to use a socket that has six sides instead of twelve. Those don't brake of the edges. Zoltan ----- Original Message ----- From: "David M" <covrambles@YAHOO.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, March 05, 2011 10:34 AM Subject: How to get spare tire out??? Urgent!
> Nut looks to be like 19mm but my 19mm socket is a bit loose. Nut is very > tight has not been removed in over 10 years but I desperately need to get > my spare tire out and mounted. I tried WD40 but its real diffuicult to > apply it and so far it refuses to yield and the socket continually slips. > Anyone got any ideas? Personally, I think the whole concept of needing a > special tool to access the spare tire is a dumb design. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.