to clean old gasket off sometimes I use a razor blade very carefully .. and spray carb cleaner. There is also 'gasket remover' in a can .. it's like paint remover ..nasty stuff. Sometimes that works. you 'could' just goop it up too.. thought that's not very good workmanship . for that I use either .. 'permatex red high tack gasket sealer.' The Right Stuff or Toyota Black silicone sealant. but clean gasket surfaces, with new gaskets with permatex Hi Tack is the best I think. the intake gaskets fit two ways .. only one is really right. I see backwards installed ones semi-commonly. be extra careful about leaks at the intke runner boots....those like to leak. I use a 'listening tube' to fine intake leaks sometimes ...a two foot long hose, about 3/8 inch ID. scott www.turbovans.com ----- Original Message ----- From: "Grungy" <grungy@GRUNGY.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Saturday, March 12, 2011 8:01 AM Subject: intake gasket?
> Injectors out - d'oh! - that was easy. > FLAPS should have seals this afternoon. > > Old intake manifold gasket appears to be glued to the intake manifold. > Hard black stuff with paper faces. > Paper face I can see is very scratched. > > I have a replacement gasket, but can't easily get the old one off, > and I could scratch up the intake during removal. Does the collected > wisdom here say replace it or use the old one? > Should I get some kind of high-temp Permatex to fill in the scratches > on the old one's paper face? > -- > > bcnu - Grungy (Houston, TX) opinions are just that.obviously. > 60 dddPanel 69 Bug 89 Carat 04 Jetta TDI 05 Jetta Wagon TDI > g r u n g y AT g r u n g y DOT c o m |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.