At 06:47 PM 3/11/2011, Jim Arnott wrote: >Motorcycle cables pull. Boat cables push and pull. Automatic transmission >cables push and pull. Though maybe not on a Vanagon. I've not dug that deep >into it. Listen to the man. Would have been nice if VW had when they set up their heater controls.* Morse are probably the world leader in control cables that operate in both directions, and I'd be amazed if our A/T cables didn't. The Morse cable that operates the reversing gear on Scamp is ten feet long with a U-bend in it and has been operating in a salt water environment since 1963 with no problems. It's half an inch thick and exerts (at a guess) 40# or more at the operating end. Has a zerk fitting on each end. *All right, that's not *totally* fair. When they were new the operating forces were low enough that they worked fine. But poor environmental sealing, possible bad choice of liner etc and lack of periodic lubrication have certainly taken their toll, and intrinsically it's a poor design. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.