What do you measure right at the alternator stud? My Ferd does 14.5 or so. So did the first Ferd alternator I had. Mark
Daryl Christensen wrote: > OK…My van charges at about 13.6 to 13.8 or9 max. All the spiffy temp/voltage > AGM battery chargers I see are 120V AC input.. > > Is there an onboard “charger widget” for upping the charge voltage to the > 14.4 the AGB batts need? > > I wasn’t aware that a modern alternator could be tweaked for higher output > voltages. Mine is a 130 amp Ferd alternator and I have an AGM batt for my > refer only. Used to do it on the old mechanical Bug regulators all the time. > > Battery/electronics master David B ??? any hints. > > > > Daryl of AA Transaxle > > 425-788-4070 > > "On the cutting edge of Old technology" > > 86 Syncro Westy w/Turbo Zetec in the trunk > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.