Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2011, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 9 Mar 2011 11:11:16 -0500
Reply-To:     Chris S <szpejankowski@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris S <szpejankowski@GMAIL.COM>
Subject:      Re: 2.1L harness question
Comments: To: Greg Potts <greg@POTTSFAMILY.CA>
In-Reply-To:  <4D76CBF8.6050408@pottsfamily.ca>
Content-Type: text/plain; charset=utf-8; format=flowed; delsp=yes

Yes, my Canadian-sourced WBX has it too, plugged in to the proper heater receptacle, of course.

You may want to consider contacting Fasforward.ca who apparently is back in business making bits for engine conversions, harnesses included.

Chris.

Wysłane z iPhone'a

Dnia Mar 8, 2011 o godz. 19:38 Greg Potts <greg@POTTSFAMILY.CA> napisał (a):

> Hi Zoltan. > > Thanks; it was the recirc hose heater connection I was thinking of. > > I am adapting a vanagon digifant harness to work with an inline 4 > motor > and not everything lines up. The inline4 digifant setup has a single > fuel injector connection, for instance. > > Happy Trails, > > Greg Potts > Toronto, Ontario Canada > 197x Westfakia "Bob the Tomato" > 1987 Wolfsburg Weekender Hardtop (ND Graphics graphics wrap) > 1988 Wolfsburg Weekender Hardtop (Colleen's ride) > Engine conversion blog: http://www.pottsfamily.ca/wordpress/ > www.pottsfamily.ca > > BUSES OF THE CORN - AUGUST 12-14th, 2011 > www.busesofthecorn.ca > > > On 3/8/2011 7:14 PM, HotelWestfalia wrote: >> Near the AFM, two wires are the ones that go to the power steering >> switch. They are L shaped and black. The wires are about 8 inch >> long and >> white. I think, because they are not different in color, they can be >> exchanged. >> An other double connector is going to the little heater of the gas >> recirculation hose that goes into the boot. >> There is a clip-on connector, like the fuel injectors have, that >> connects under the inlet pipes, next to the AFM, that comes from the >> throttle valve switch. >> Zoltan >> >> ----- Original Message ----- From: "Greg Potts" <greg@POTTSFAMILY.CA> >> To: <vanagon@GERRY.VANAGON.COM> >> Sent: Tuesday, March 08, 2011 12:34 PM >> Subject: 2.1L harness question >> >> >>> Hi Volks, >>> >>> On my digifant wiring harness there is a 2-prong connector on the >>> firewall just above the AFM. What does that connect to? >>> >>> Fuel pump perhaps? >>> >>> Happy Trails, >>> >>> Greg Potts >>> Toronto, Ontario Canada >>> 197x Westfakia "Bob the Tomato" >>> 1987 Wolfsburg Weekender Hardtop (ND Graphics graphics wrap) >>> 1988 Wolfsburg Weekender Hardtop (Colleen's ride) >>> Engine conversion blog: http://www.pottsfamily.ca/wordpress/ >>> www.pottsfamily.ca >>> >>> BUSES OF THE CORN - AUGUST 12-14th, 2011 >>> www.busesofthecorn.ca >>> >> >> > > > --


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.