Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2011, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 13 Mar 2011 14:40:39 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Fix or replace? - was Surface Rust on Gas Tank (with pics)
Comments: To: Rob <becida@COMCAST.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

very true .. one factor though .. the quality of new aftermarket vanagon gas tanks isn't all that great sometimes.

personally...I'd go for................ my first preference...would be ... a really good used vanagon gas tank with the later style smaller diameter plastic fuel filler neck. Those are a breeze to remove and install...the larger metal ones used on early tanks can be a real PIA.

also be aware that while then can look clean as could be visually looking into them through the sender hole... the critical part where the fuel pick up in a sump is, can't be seen. Then can be restricted or clogged there ...not real common, but possible.

scott www.turbovans.com

----- Original Message ----- From: "Rob" <becida@COMCAST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, March 13, 2011 2:03 PM Subject: Re: Fix or replace? - was Surface Rust on Gas Tank (with pics)

> This is another one of those things that just ought to be replaced if > you have the money. Messing with broken brake system bleeder valves & > old radiators are other things that are not really worth the time vs > just replacing. > When I worked at the front end shop we'd get a guy in who just bought > used brake rotors from the wrecking yard then came to our shop to > have them turned, he was spending $35 on a used rotor that cost $25 > new at the FLAPS... > > Check on what it would cost to replace the part with a new one and > just do the job once. > > Rob > becida@comcast.net > > At 3/13/2011 01:24 PM, B Feddish wrote: >>This is one of those things where the replacement cost of a new part is >>$100-$150. Why spend hours trying to renew something as critical as a gas >>tank with rust inhibitor when replacement is probably a better solution >>and >>will last longer. >> >>Thanks, >>Bryan


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.