Date:         Mon, 14 Mar 2011 16:17:56 -0400
Reply-To:     Ken Wilford <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Wilford <kenwilfy@COMCAST.NET>
Subject:      Re: Replacing windshield seal
Comments: To: B Feddish <uprightbassghost@HOTMAIL.COM>
In-Reply-To:  <BLU162-ds123F82236F4A5C64C06DAECECC0@phx.gbl>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Bryan, the best thing to do is to call a local auto glass shop.  They
can pop the old window out, check out the frame for you, and pop the new
seal in and it doesn't take them any time or extra effort.  I would say
the cost should be under $100.  Actually I have gotten a brand new
windshield installed for around $220.  With an old windshield there are
no guarantees that it won't break when trying to either pull it out or
put it back, but at least a window shop guy has a good chance of popping
the old one out and putting it back in one piece.  Just my experience.

Ken Wilford
John 3:16
www.vanagain.com


On 3/14/2011 7:50 AM, B Feddish wrote:
> I'm going to take out my windshield when I paint this week.  I'm sure
> it's
> leaking and it's the original seal.  I just ordered a new one from BD
> this
> morning.
>
> How hard is this to put back in?  I've done side windows before but
> never a
> windshield. Is it too hard to do myself? Should I have a glass
> replacement
> guy on standby to put the new one back in?
>
> Any tips on getting the old one out will be appreciated.
>
> BTW, the bodywork is all done, the van has been scruffed and wet
> sanded w/
> 400 grit all over.  It's ready to tape but it won't be warm enough to
> paint
> until the end of the week.  The film is already in progress....
>
> Bryan
>