At 04:03 PM 3/18/2011, Troy wrote: >I will break out the solder gun and get busy! Wish me luck. Erm...can be done, but you'll have a much easier time of it with a fifteen or twenty watt iron. Well - a somewhat easier time, I guess. Everything's out in the open there, plenty of room. Just be absolutely sure to leave slack in all the leads but most especially the reed switch ones. You'll have to resolder all the existing ones. Once that's done the wand will be able to flex a bit without instant disaster. d ps - it goes without saying, but - electronic flux-cored 60/40 or 63/37 solder. Don't even think of plumbing solder and flux. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.