If you are using a new seal that all of the vendors sell , be ready for a fight . Lube both the body and the seal . I usually get the bottom and sides set and then go about working the top in with a tool while pressing and gently beating on the outside . Make sure that the lip of the seal is up Against the pinch weld before pulling the strong . The guys at G/W say they break a few windshields trying to install these seals . Good luck and keep the name of a pro near by. Stacy Boy Scout " Wood Badge " trained. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.