Hi to all, This is a '91 model, 2.1L Vanagon, gas, 2wd, I am using my Digitool and with a new Oxygen sensor I'm getting 10.6 volts on the "Oxygen sensor ground" reading. It started off with (minus) -0.2, and it supposed to be about 0 (zero), which was fine, then very soon it jumped to 10.6 and staying there. Before I installed the new sensor, the old one was doing the same. Question; any of you know about this kind of thing? and if yes, what to do with it? I'm having 10 mpg with this van. Most of the things have already been changed, like the wires, plugs, cap and rotor, temp. II sensor, and now the Oxygen sensor, and the timing is right. Any ideas? Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.