Based on what I see at discounttire.com it's an ET38 16x7.5 for alloys. So no fit wthout a 15mm or so spacer up front. I found steel wheels listed at 16x7, so they better be ET 37 or less. I do not know about the type of lug seating surface or diameter. At $56 a pop, given they fit, they are a deal, but not as good as CLK forged alloys, which are light and strong. Chris. Wysłane z iPhone'a Dnia Apr 1, 2011 o godz. 11:48 Matthew <mpteleski@YAHOO.COM> napisał (a): > Follow-up: > > The steel rims (see below) fit a 2wd w/o modifications (not tried on > a syncro, but it SHOULD fit). They are 7" wide and made in Germany. > Not sure of the offset though. FYI > > -matt > > >> Date: Thursday, March 31, 2011, 11:12 AM >> anybody got any info on 2008 Pontiac G6 >> rims? they are 16" 5x112. I'm going to look at them tonight, >> but if someone has info it may save me an hour of driving to >> look at them. Don't know offset or hole size in the center, >> etc. >> >> -matt >> >> "may the four winds blow you safely home" >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.