Date:         Wed, 6 Apr 2011 14:09:01 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: Sealing Windshield?... [Was: thank you vanagon community!]
Comments: To: Roland <syncronicity1@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Windshield installing companies seal windshields in place , I believe, just
as you are talking about.
Might check with a few.
might be worth a few bucks invested.

you have the right idea about lifting up the rubber ...etc.

if you don't want your sealant to stick to the painted surface on the
outside,
but a thin film of something like vaseline there, as a separating agent..
and the sealant won't stick to the paint next to the rubber seal.

if it's rusted or rusted through underneath the rubber ..
it might take a 'real' ..remove windshield, new rubber seal, reinstall, etc.

scott
----- Original Message -----
From: "Roland" <syncronicity1@GMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, April 06, 2011 1:24 PM
Subject: Sealing Windshield?... [Was: thank you vanagon community!]


> Does anyone have experience with re-sealing the windshield leaks without
> the
> R&R of the windshield?  I've heard suggestions to squeeze some clear
> silcone
> sealer between the windshield and the rubber seal at the bottom.  I think
> it
> would require a couple of narrow things (soft like wood, i.e. chopsticks,
> not screwdrivers) to lift the rubber seal a bit, squeeze in the sealant,
> press it down, let it dry, and then trim away any excess (perhaps with a
> razor blade).  Would that seal any gaps and keep the water away from any
> potential rust holes?
>
> Any comments?  Would that be a waste of time?
>
> Also, same question for the top portion of the seal, same deal, lift it up
> etc., but of course be real careful because this time the surface is
> paint.
> Does the seal ever form leaks at the top also, or just the bottom?
>
> Thanks!
> Roland
>
> On Wed, Apr 6, 2011 at 9:54 AM, Jake de Villiers <
> crescentbeachguitar@gmail.com> wrote:
>
>> Glad you had a good time!
>>
>> It sounds as though you have a small leak in your windshield seal or
>> maybe
>> a
>> little rust hole under the seal?
>>
>>