Date:         Tue, 5 Apr 2011 10:21:08 -0700
Reply-To:     John Goubeaux <john@UCSB.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Goubeaux <john@UCSB.EDU>
Organization: University of California Santa Barbara
Subject:      Fuel hose clamp tool
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Does someone know what the proper clamp tool is to remove install the
small blue ( crimp style) clamps on fuel hose/injector connections?
Sorry I don't have a picture, but these were used by the VW dealer when
they did the warranty/recall replacement of the fuel hoses/injectors a
variety of years ago.

I'm wondering if i can find a pair of these clamp tools without too much
trouble, and I assume I can re-use these clamps ?

Thanks  -john

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.