Rocky, As Chris replied, the cover slides straight aft, but it may take a good yank to get it moving, watch the dash lip as he says. Once the cover is off, watch that the plastic bits that hold the flap(s) hinge in the box don't fall out (if you find a strange piece or pieces of black plastic on the floor after pulling the cover, that is probably what they are; quantity 4, one at each end of the flaps). The heater cover normally holds these in place. Once the cover is off, you will see the horizontal channels in the cover, and the corresponding edges on the heater box. Hope this helps, Dave On Sun, Apr 10, 2011 at 4:13 PM, Rocket J Squirrel < camping.elliott@gmail.com> wrote: > > ".......Can the heater cover plate be removed without removing the dash?" > > -- > Rocky J Squirrel > '84 Westfalia: Mellow Yellow ("The Electrical Banana") > '74 Westrailia: (Ladybug Trailer company, San Juan Capistrano, Calif.) > Bend, OR > KG6RCR > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.