Date:         Sun, 10 Apr 2011 12:37:34 -0700
Reply-To:     John Goubeaux <john@UCSB.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Goubeaux <john@UCSB.EDU>
Organization: UCSB
Subject:      Engine R/R question
Content-type: text/plain; charset=ISO-8859-1; format=flowed

Can someone, who has perhaps done a lot of engine R/R, indicate the
order of installation for the rear engine tin? ie does it go in before
the engine is lifted up and the rear engine mount is bolted on ? Or
after?  I did not pay too close attention when I removed the engine but
it looks like at least a couple of the rear engine mount bolts go
through or hold it down. I am wondering what the easiest install
sequence is.

BTW : this is a 90 2.1 2wd

Thanks!

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.