Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (April 2011, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 21 Apr 2011 10:06:05 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Horns and Steering Columns
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Hooray!! My horn now works - after months of being without.

Just couldn't seem to find time to devote to the repair, then one day recently it was time. Ordered up a new official Volkswagon Vanagon Horn Contact Ring to replace the one that had worn out - and it didn't work. Nope, right out of the box there was something wrong. The metal part of the horn contact ring dragged the screws of the column switches - shorting out the horn and causing it to blow unexpectedly, and it would not shut off. I couldn't figure out the problem. David Beierl stepped in and was of enormous assistance in my coming to understand how the column assembly is designed and constructed to go together. Still, the horn didn't work. A watchmaker friend came by, and offered to take a look, and said simply - the diameters of the back of the horn rings are different. BLING!!!! the lights went on. It turned out the older part - the plastic part had a shoulder on the back side that the new part did not. That shoulder acted like a spacer washer and it's thickness provided the needed clearance between the horn ring and the column switches screws. The new horn ring without the shoulder, allowed the steering wheel to push the horn ring down against the column switches, shorting them out.

The solution> - remove the metal part of the new horn ring and put it on the old horn ring. Worked like a charm.

So - should you ever find yourself working this project, consider that shoulder on the horn ring.

John

-- John Rodgers Clayartist and Moldmaker 88'GL VW Bus Driver Chelsea, AL Http://www.moldhaus.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.