I was wrong. I now see what you meant. Nope. Didn't put rack in soft jaws in vice. That was potentially foolish. Bentley shows the right way to remove tie rods from rack. Can't believe I did that. Especially to such a nice low mileage rack! Neil. On Sun, Apr 17, 2011 at 1:49 PM, neil n <musomuso@gmail.com> wrote: > When torquing nut, I was careful to position rack "loose" in vice ..... > In Bentley I see the image of the rod in soft jaws, but have not found > image of tool used to torque inner tie rod end.
> On Sun, Apr 17, 2011 at 10:45 AM, David Beierl <dbeierl@attglobal.net> wrote:
>> .... But I hope (expecting the answer no) you clamped the rod in >> the vise with soft jaws the way it shows in Bentley, not the outer case of >> the unit. Failing to do that would put enormous leverage on the pinion and >> associated parts.
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.