The way I see it, you shouldn't see continuity between 30 and 56 no matter switch position. x from ign switch goes to x of headlight switch then onwards.
Neil. On Mon, Apr 25, 2011 at 5:46 PM, Chris S <szpejankowski@gmail.com> wrote: > I need some help to make sure I'm testing this properly. My headlights do > not work, high beams and parking lights work. When I turn on my headlights > I see the LED clock display slowly fade out. It comes back when I turn off > headlights or flip to high beams. > > Based on the schematic on page 97.56 of the Bentley manual, terminal 58 is > parking lights and terminal 56 is headlights. When testing between > terminal > 30 and 58 I see continuity when I press the switch to its first detent, as > expected. When testing between 30 and 56, I see no continuity at all > regardless of switch position. > > Is the switch bad? > > -- > Chris S. > "No solution is too complex to be executed incorrectly" >
-- Neil Nicholson '81 VanaJetta 2.0 "Jaco" http://tubaneil.googlepages.com/ http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.