Dan, At the back of the rails that the seat slides in there are tabs that are bent in and stop the seat from going further back. If you open up the tabs a bit the seat will slide back farther. I've done that with my Westy. Werner in Sac
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Daniel Rotblatt Sent: Wednesday, April 27, 2011 6:56 PM To: vanagon@GERRY.VANAGON.COM Subject: Moving the Seat Back I have a bit of a funky knee, and it would be helpful if I could move the seat back a bit - just driving around town I can feel it on my knee, in the long run it may cause damage. On a couple of other cars I've just unbolted the tracks and moved them back 4-6" - but it seems that on my Vanagon, the track is an integral part of the box the seat is attached to. Any suggestions, known fixes/mods that can change this. I have no problem fabricating anything, I weld, etc. Dan Los Angeles, CA '85 Westy Weekender |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.