If you look more closely the label is correct but the eye plays tricks. There is a bracket for the 15 and the wire f is outside the bracket and thus not labeled 15 though it almost appears to be. Mark
David Beierl wrote: > >> Based on the schematic on page 97.56 of the Bentley manual, terminal >> > > Look more closely at the drawing of the switch, which is shown in the > "off" position. All those wires a b c d at the top of the page are > all 30 circuit (i.e. live all the time) and wire d comes to the 30 > terminal on the right side of the switch. Note that there is an > internal jumper in the switch to a second 30 terminal which supplies > another wire feeding the clock. That wire f is incorrectly labelled > as a 15 (switched) circuit and feeds the clock. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.