Date:         Fri, 6 May 2011 18:42:48 -0600
Reply-To:     Robert Stevens <mtbiker62@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Stevens <mtbiker62@GMAIL.COM>
Subject:      Re: Temp Gauge High on Startup + Blinking Light
In-Reply-To:  <8571DD6D-6EE4-4E9C-8E71-9F148EEFAF3E@gmail.com>
Content-Type: text/plain; charset=us-ascii

On May 6, 2011, at 6:25 PM, Cunegonde wrote:

> So, in stop & go traffic, I'm getting the flashing LED, but with gauge at normal operating temperature. 
> 
> What does that LED indicate, and what do I need to fix, now?
> 
> 
> CB
Your coolant is low or the sender needs replacing. Check the coolant level in the pressure tank.
If your coolant is low, you may have a leak somewhere in the system.
bob

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.