VANAGON archives -- May 2011, week 2 (#130)

Date:         Tue, 10 May 2011 12:19:01 -0700
Reply-To:     HotelWestfalia <zolo@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         HotelWestfalia <zolo@FOXINTERNET.NET>
Subject:      Re: end play measurement
Comments: To: Rick Koller <rkoller@HELIX.NIH.GOV>
In-Reply-To:  <201105101859.p4AIxIax020092@helix.nih.gov>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

The work you do is not related to endplay.  It is good to check though.  It
may need setting again.
Zoltan

----- Original Message -----
From: "Rick Koller" <rkoller@HELIX.NIH.GOV>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, May 10, 2011 11:59 AM
Subject: end play measurement


> Greetings all,
>        I have to replace the main seal behind the flywheel on my syncro,
> so
> I will replace the clutch while the tranny is out. I have resurfaced
> a spare flywheel that I will install. Do I need to check the endplay?
> Thanks.
> Rick
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.