Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2011, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 10 May 2011 15:45:58 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: How the dickens? (Pickle of the day)
Comments: To: Rocket J Squirrel <camping.elliott@GMAIL.COM>
Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original

maddening isn't it ?

the rod sliding forward is a problem.. I might have used a big vice grips to prevent that. and a needle nose vice grips to hold the small too-strong spring back to get the clip in.

----- Original Message ----- From: "Rocket J Squirrel" <camping.elliott@GMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, May 10, 2011 3:17 PM Subject: How the dickens? (Pickle of the day)

> Following the procedure in Bentleys 37.13, I have set about tinkering > with the length of the throttle adjusting rod to see if I can affect > kick down to better accommodate the limited range of motion I have in my > right ankle. > > But now I can't get the thing back together. I can't mash the Override > Spring (#2 in the left picture on 37.13) far enough onto the Adjusting > Rod to expose the end so I can push the Circlip back on. > > That's a mighty tough little spring, and the adjusting rod isn't helping > matters by sliding forward when I start putting pressure on it. > > What's the trick here? It feels like even if the adjusting rod was > immobile I would not have enough strength in my fingers to mash the > spring far enough forward and hold it there long enough to reach for the > circlip, drop it, fumble for it, find the little pliers, pick it up, put > it back down and turn it the right direction, pick it back up again, and > get it onto the end of the rod. > > Stupid manual should warn a fellow that "assembly is the reverse of the > above procedure except that the spring takes superhumanly strong small > fingers to reinstall". > > -- > Rocky J Squirrel > '84 Westfalia: Mellow Yellow ("The Electrical Banana") > '74 Westrailia: (Ladybug Trailer company, San Juan Capistrano, Calif.) > Bend, OR > KG6RCR


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.