Date:         Sat, 14 May 2011 10:50:41 -0700
Reply-To:     BenT Syncro <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT Syncro <syncro@GMAIL.COM>
Subject:      Re: Wheel studs/spacer kit
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
In-Reply-To:  <BAY152-ds4F3EC1739D0BDC377B617A08B0@phx.gbl>
Content-Type: text/plain; charset=us-ascii

I've been communicating with Ralph via pmail. It has been determined that he has a set of the Carat/Wolfsburg. 14" stock alloys with conical seats. He has longer lugbolts for the front but they are the ballseat variety per his communication. It is yet to be determined what he has in the rear. It's probably ballseat lugnuts which is why he is not able to engage enough threads on the rear studs.


BenT

sent from my electronic leash

On May 14, 2011, at 7:38 AM, Dennis Haynes <d23haynes57@HOTMAIL.COM> wrote:

> ET does not give information for wheel lug nuts or bolts. What type of wheel
> and what are the lug requirements? The lugs has to match the seat type.
> 
> Dennis
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of

> ralph meyermann
> Sent: Friday, May 13, 2011 10:10 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Wheel studs/spacer kit
> 
> I purchased som et30 wheels for my 82 westy and the rear studs seem really

> short is the go westy stud/ spacer kit even out my track width and give me

> enough threads? Thanks