Date:         Mon, 9 May 2011 15:43:41 -0500
Reply-To:     John Rodgers <inua@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Rodgers <inua@CHARTER.NET>
Subject:      Re: Likelihood of Windshield breaking on removal?
Comments: To: Peter Lapp <carrothospital@GOOGLEMAIL.COM>
In-Reply-To:  <BANLkTinF-7EkUcFPaonJhLjj7VLEMHHwZQ@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

  There is ALWAYS the risk of breakage - it's a matter of how big the
risk. A competent shop can probably get it done without breaking - but
the RISK of breaking is there - so be prepared financially to replace
the lass if it does. Most shops, even good ones, will play CYA on such
repairs.

IIRC, the Bentley says something about using a sealer along with the
installation. Be sure that gets done. Otherwise - RISK (that word again)
of leaking after done. Best to get it right the first time.

John

John Rodgers
Clayartist and Moldmaker
88'GL VW Bus Driver
Chelsea, AL
Http://www.moldhaus.com


On 5/9/2011 2:12 PM, Peter Lapp wrote:
> Hi all,
>
> I recently bought a new rubber seal for my windshield and called a few
> places to see how much installation would be. A few told me there's a good
> chance it could break when removed. I don't have any cracks or chips, it's
> in perfect condition. Is it really that likely that it would happen, or do
> they all say that for liability reasons?
> I got quotes anywhere from $60 to $125. I'll most likely go with the cheaper
> option, seeing as I don't see any reason to spent twice the money if there's
> not much to it.
> Any input would be appreciated!
>
> Peter
>
>