At 04:37 PM 5/24/2011, Karl Ploessl wrote: >Go with David's measurements. I recall that it needed some convincing >to get all the bolts in but eventually they did. i will go out tonight >and try to measure Go with his measurements but not his arithmetic. I forgot to take away a *full* diameter from the outside measure to get the O.C. distance. So that is 3 1/2 x 2 inches, very sorry. The bolts on mine are tapped right into the plate, so you can't ooch them around to get a fit; they either fit or don't. Bolts used were UNF 1/2"-20 tpi. Crawling on my belly in shame... d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.