Ultimately the wire goes to the sensor between the 2 inner push rod tubes on the drivers side. You will have to remove that tin to replace the sensor or that wire. The wire does start from above the engine and it is common for it to cut by the tin or burned from the exhaust pipe. Dennis Sent from my Windows Phone -----Original Message----- From: Rocket J Squirrel Sent: Thursday, May 26, 2011 11:11 AM To: vanagon@GERRY.VANAGON.COM Subject: Where can this wire be found? On the watercooled 1.9L ('83, 84) vanagon, can the oil pressure switch wire (blue with black stripe, bentley p. 97.56, current track number 29) be accessed from the top of the engine compartment, and if so, where the dickens is it?
-- Rocky J Squirrel (Whose sig could mention that he hates climbing under the van, but doesn't) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.